Welcome Guest. Sign in or Signup

4 Answers

Departure Into Class C Airspace

Asked by: 2623 views , , ,
Airspace

Hello All

Let's look at 9G0, Buffalo Airfield. If someone took off from runway 6, there is no possible way to avoid entering class C airspace without talking to approach first. How in the world does the faa expect us to not violate class C here? Let's just say that we can't call Buffalo approach or tower on the ground because that is most likely the case. The a/fd mentions the clearance delivery number as it does for every airport. I know that if the outlying airport is already in class C, we are supposed to contact that airport as soon as practical after takeoff. To me, this doesn't apply here because we are not starting in class C. The same thing could be said for BQR, Buffalo Lancaster. Any opinions, especially correct ones, are appreciated.

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

4 Answers



  1. jay2712 on Jun 07, 2016

    In looking at the chart, I see they have carved out a spot for 9G0 so that it is in the outer ring of the class C. So the floor of the C airspace above 9G0 is 2199 msl, as class C would begin as charted at 2200 msl.
    I would depart and turn out to avoid the inner ring which begins at the surface, initially.

    I would also verify that I couldn’t reach ATC on the ground, but would in any event contact ATC “as soon as practical” upon takeoff. Squawk 1200 on the box until given a code and ATC will see you anyway for separation. Contact them quickly with where you have departed from and your intentions as to course/direction of travel.

    Another useful tip would be to check with someone at the FBO before departure to see what local custom is for departing.

    Hope this helps, as its within regs and would work.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  2. Nascr1Arrival on Jun 08, 2016

    I really don’t think it’s practically possible to avoid the airspace. It is very close – a few hundred feet – from the departure end of the runway.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  3. Dave M on Jun 09, 2016

    action@mindless.com

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  4. Dave M on Jun 09, 2016

    Also, you could could call (radio or phone) approach control prior to your departure, let them know your situation/intent, and they’ll probably give you a sqwak code.

    +2 Votes Thumb up 2 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.