Welcome Guest. Sign in or Signup

3 Answers

Altimeter setting error for ILS approach

Asked by: 3601 views , , ,
Commercial Pilot, General Aviation, Instrument Rating, Student Pilot

1.Today if I doing an ILS approcah(Elevation of touchdown zone is 500ft MSL,DA(H) is 200ft  AGL),and ATIS report pressure setting is 30.42;unfortunately my altimeter is remain at 29.92 and can not  be change.the original DA is 700ft MSL(500+200).What is my new DA(H)? 

 

2.Today if I doing an ILS approcah(Elevation of touchdown zone is 500ft MSL,DA(H) is 200ft  AGL),and ATIS report pressure setting is 29.42;unfortunately my altimeter is remain at 29.92 and can not  be change.the original DA is 700ft MSL(500+200).What is my new DA(H)? 

Ace Any FAA Written Test!
Dauntless Aviation's GroundSchool series of apps are the smart pilot's choice for fast and effective FAA knowledge test prep.
Actual, up-to-date FAA questions Polished user experience
Best explanations in the business Free lifetime updates!
Private Pilot IFR Commercial Pilot CFI ATP Sport Pilot Sport Pilot Instructor Parachute Rigger Aviation Mechanic (A&P)
You can get the app now and be studying right away. Available for PC, Mac, iPhone/iPad, and Android.

3 Answers



  1. Kris Kortokrax on Dec 11, 2014

    If your altimeter cannot be set to the current altimeter setting (a sensitive altimeter), you will not be flying an ILS approach.

    91.205(d) requires a sensitive altimeter for instrument flying.

    +2 Votes Thumb up 2 Votes Thumb down 0 Votes

  2. Best Answer


    Russ Roslewski on Dec 11, 2014

    I read the question almost as if the altimeter is broken sometime in flight (a rare event certainly), but Kris is right that if this was a problem before takeoff you shouldn’t be flying IFR anyway.

    However, assuming that’s it’s really just a standard written test question asking you about altimeter errors and pressure changes, then it works like this:

    Each inch = about 1000 feet of indicated altitude. Since your altimeter is 0.5 inches off, that’s about 500 feet. The questions above are just opposites of each other, so in one case it’ll read 500 feet high, in the other, 500 feet low. We just need to figure out which.

    I tend to think of these type of questions from the cockpit view and turning the knob on the altimeter. If you turn it right/higher pressure, the altitude displayed goes up, which makes sense. So, sit there in your hovering aircraft at DA at the real 700 MSL and adjust the altimeter setting.

    In question #1, If you had the altimeter set correctly at 30.42 it would read 700 MSL at DA. But now take that knob and adjust it down to 29.92. Your indicated altitude is going to go DOWN by 500 feet, to 200 MSL.

    So the answer to your first question, if I understand the intent correctly, is 200 MSL.

    It’s the opposite for the second question.

    If I got the scenario or the intent of the question wrong, please let me know and I’ll adjust my answer.

    +2 Votes Thumb up 2 Votes Thumb down 0 Votes



  3. Anton Dotti on Dec 12, 2014

    Russ is correct. However, if 29.92 remains in the Kollsman window, the altimeter will read pressure altitude, not altitude AMSL. Don’t confuse those two unless it’s a standard day.

    200 ft PA the first question and 1200 ft PA in the second, when at the DA of 700 ft AMSL.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.