Welcome Guest. Sign in or Signup

3 Answers

KCRQ: ILS or LOC/DME RWY 24 – Visual Descent Point/Missed Approach Point

Asked by: 4745 views FAA Regulations, Instrument Rating

CHART:

http://155.178.201.160/d-tpp/1408/05310ILD24.PDF

Where would be the Missed Approach Point for the Non-Precision Approach into KCRQ RWY 24?

The confusion stems from whether it would be at the VDP (I-CRQ 2.7DME) (since "typically this is a point on the final approach course of a non-precision approach, from which the aircraft would be able to continue its descent from the MDA to the runway threshold") - BUT one could always do a CIRCLING Approach. Therefore possibly could be the Runway Threshold (I-CRQ 0.9DME) - but the Profile View depicts the dashed missed line breaking off before then?

Thank you for your help!

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

3 Answers

  1. Best Answer


    John D Collins on Aug 20, 2014

    The MAP for the localizer/DME approach is depicted with the vertical line at the threshold at 0.9 I-CRQ DME. With the AeroNav charts, they do not depict multiple pull ups for the missed approach as Jeppesen does on their charts, the just depict the one for the full ILS at the DA. The VDP only applies to the localizer procedure and is where the GS intersects the MDA. If you are at the MDA prior to the VDP, you should not commence your descent to the runway, assuming it is in sight, until reaching the VDP location.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  2. Mark Kolber on Aug 20, 2014

    I agree with John except for one question I have:

    Assuming, on the localizer, you break out of the clouds before the VDP and have the runway in sight with plenty of visibility and visual references, maybe even a VASI or PAPI, why not begin a nice leisurely descent to the runway? I’ve always thought of the VDP as the last point from which one can make a 3° descent to the runway, the so-called “normal rate of descent using normal maneuvers” required by 91.175, not as the only point from which one should do so.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  3. John A Randall IV on Aug 20, 2014

    Thank you @JohnDCollins for your clarification, for curiosity do you happen to have an image of the Jeppesen version of the KCRQ: ILS or LOC/DME RWY 24?

    Good question @MarkKolber!

    ~John

    0 Votes Thumb up 0 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.