Welcome Guest. Sign in or Signup

2 Answers

Procedure Turn Boundary

Asked by: 3956 views Airspace, FAA Regulations

Reference (KBCB ) LOC/DME Runway 12 : The procedure turn is a racetrack pattern with 1 min. legs.

Typically there is a note to “remain within 10NM” of a fix for a procedure turn. There is no such reference to “remain within xxNM”  for this approach but there is a 10 NM ring printed on the approach plate.

When performing this PT, what are the boundaries (assume max. PT speed of 200 KIAS)?

Is the protected area only 10 NM ? Or is the protected area predicated as long as you fly no greater than 200 KIAS for 1 minute?

Thank you for the feedback.

Regards,

Dan

2 Answers



  1. John D. Collins on Apr 05, 2013

    This is a hold in lieu of a procedure turn (HILPT) and the hold is anchored at the PATDA intersection, one minute turns, so there isn’t a need for a 10 NM limit, the limit is a one minute leg. The maximum holding speed below 6000 MSL is 200 Kts unless otherwise noted on the holding procedure. The holding pattern area is protected on both the holding and non holding side based on the IAS limit, adjusted to a TAS at the holding altitude, and considering the worst case wind conditions as well as buffer for delay by a pilot who doesn’t start the turns on time. There are some 31 different standard areas for holding patterns which are affected by the altitude and speed of the hold. If you want to learn more than most would care about how these are constructed, the information can be found in FAA Order 7130-34.

    The 10 NM ring on the chart is simply there for the pilot to gage distance by and is no longer part of new approach charts as it has been eliminated. It is bound to go away whenever there is a major update to the procedure as it has no relevance to any procedural requirements.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  2. Dan Chitty on Apr 05, 2013

    John,

    Thank you for the feedback and clear explanation.

    Regards,

    Dan

    0 Votes Thumb up 0 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.