Welcome Guest. Sign in or Signup

2 Answers

Constant speed propeller

Asked by: 5032 views Student Pilot

why does constant speed propeller is kept in course pitch while shutting downthe engine ??

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

2 Answers



  1. Lucas on Aug 11, 2012

    uh I don’t think I understand the question, but know that different engines use different governor systems to keep the propeller at its current blade angle. Some of them use engine oil to push the blade to low RPM and high angle of attack and a spring + air or nitrogen to pull it back and some the opposite. All of this is controlled by fly weights that spin with the propeller. If the propeller stops rotating so the the fly weights. Again most POHs will tell you to put the prop lever all the way in before shutting down, so always refer to your checklist to find the correct procedure for your airplane. Finally on turboprops the blades are usually in auto feather mode so shutting down the engine will cause the blase to go into feather position allowing for the lowest amount of drag possible on the dead engine prop in the case of an engine failure.

    Lucas
    http://passfaaexams.com

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  2. Matthew Waugh on Aug 11, 2012

    Generally speaking it doesn’t go to coarse pitch when shutting down.

    Most single engine planes it goes to FINE pitch – and it does this because there’s a large spring always trying to drive the prop to fine pitch, and oil pressure is used to counteract the spring as needed.

    On most multi-engine planes the prop goes to feather (which I suppose is the most extreme form of coarse pitch, so maybe that’s where your question comes from). Same thing, spring drives it that way.

    This is because on a single engine plane you don’t need (or generally have) the complexity of a feather position, and fine pitch gives less resistance during an engine start. On a multi-engine plane, in the event of a loss of oil pressure you want the prop to go to feather for minimum drag.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.