Welcome Guest. Sign in or Signup

4 Answers

When do I need to slow down below maneuvering speed?

Asked by: 8691 views General Aviation

Although maneuvering speed is 108 KTs, but i never reach that speed.

if the power is high , and i pitch down, that way will reach 108.

but, i think its ok to get over that speed as long as under Vne.

But i got this question. please help. lol

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

4 Answers



  1. Steve Pomroy on Jul 24, 2012

    The short answer:  You need to be below Va in order to use full-scale control deflection on the aileron, elevator, or rudder.
     
    For some more detail, you can look here:
    http://www.flightwriter.com/2010/09/va-not-bad-speed-just-misunderstood.html
    and here:
    http://www.flightwriter.com/2010/09/va-not-bad-speed-just-misunderstood_27.html
     
    Cheers,
    Steve

    +3 Votes Thumb up 3 Votes Thumb down 0 Votes



  2. Dave M on Jul 24, 2012

    You can fly above Va (Maneuvering speed). However, flying above Va may cause structual damage to the aircraft during abrupt maneuvers or heavy turbulence.
    Keep in mind that Va changes depending on the weight of the aircraft. It may be 108 kts @ maximum takeoff weight, but it could be significantly lower when the airplane is lighter.
    —
    Another speed you may want to consider is Vno (Normal Operating). You should only fly above that speed in smooth air.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  3. Bob Watson on Jul 25, 2012

    The idea behind Va is that it’s the speed at which the airplane will stall before it exceeds its rated load factor. I.e. you’ll stall the plane but you wont’ bend it. That’s why Va goes down as the weight goes down–the stall speed goes down as weight goes down.
     
    If you are at or below Va (for the current weight), you (or the turbulence) can’t impose forces on the plane that exceed what it was built to handle.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  4. Lucas on Jul 25, 2012

    I had actually posted a video before on the subject of Va but in case you missed it here it is again
     
    http://www.youtube.com/watch?v=oEHJXTlu6B8
     
    Enjoy,
    Lucas

    0 Votes Thumb up 0 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.