Welcome Guest. Sign in or Signup

4 Answers

Marker Beacon SENS need to be on LOW why? what is the HI for?

Asked by: 11551 views Instrument Rating

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

4 Answers



  1. Lucas on Jun 28, 2012

    High setting was for use when fan markers were used along airways to mark one’s progress along the airway ie pre-DME.Hi setting (high sensitivity) was used to allow for the resulting weaker signal cruise altitude caused.
    Lucas
    http://www.pilottrainingsolutions.com

    +7 Votes Thumb up 7 Votes Thumb down 0 Votes



  2. Matthew Waugh on Jun 28, 2012

    Another use – and Lord knows I’m not saying this is a good idea, I’m just saying I’ve seen it taught – is to put it on HI sensitivty at the start of the approach and, when you hear the beacon coming in, put it on LO sensitivity so it doesn’t blow your ears out as you cross the beacon. It gives you more warning that you are approaching the beacon.
     
    Of course the marker beacon is fast becoming a thing of the past – so we look forward to future questions such as “I never use this HI LO switch on my panel, what does it do?”

    +2 Votes Thumb up 2 Votes Thumb down 0 Votes



  3. Steve Brack on Jun 29, 2012

    The “high” sensitivity setting was for use with the fan markers that were used along airways to mark one’s progress before the widespread deployment of DME, particularly when radio range stations were still being used to define the airways.  It compensated for the weaker signal resulting from being at cruise altitude and thus farther away from the marker beacon.  Fan markers are still used along airways to some extent overseas, I understand.
    The “low” sensitivity setting is for use with marker beacons because if receiver sensitivity isn’t reduced, the beacon could be picked up at 2-3 miles away, making the signal useless for precisely locating yourself along the approach path.

    +4 Votes Thumb up 4 Votes Thumb down 0 Votes



  4. Will on Aug 02, 2013

    LO/HI is a sensitivity adjustment
    Selecting “LO” switches an attenuator into the input line of the receiver. This is normally done below 10000ft.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.