Welcome Guest. Sign in or Signup

1 Answers

Multiengine OEI (One Engine Inop) PA44

Asked by: 2231 views , , , ,
Aerodynamics, Commercial Pilot, General Aviation

I have done some Piper Seminole time but I am struggling with some of the maneuvers (Steep turns, Slow flight). The yoke feels really heavy for me and sometimes I can't feel the trim working.

Anyways, one of the things I am really struggling with is the OEI. Setting up the aircraft for the Zero Sideslip (Half Ball Centered and up to 5 degrees bank to the operating engine) seems to be hard. I always end up with ball-centered but isn't ideal because it creates more drag compared to the Zero Sideslip. With this, I also confused about how to maneuver the airplane in one engine INOP. Let's say you are flying on one engine on the IAP with left engine INOP, you are currently in a bank to the left and half left rudder. If you want to correct to the right, what do you need to do? Release rudder and right aileron? I think I have been mixing things up.

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

1 Answers



  1. Russ Roslewski on Apr 05, 2021

    If the ball is centered when you have one wing up, it means you have too much rudder. This is not an unusual problem in the PA-44, since it really doesn’t have a whole lot of asymmetric thrust to begin with. People stomp on that rudder when it really doesn’t take a whole lot. To see it, try bringing the wing up 3-5 degrees without any rudder, then add just enough rudder to move the ball halfway out. I bet it’s less than you’re doing now.

    For the second question, I’m not entirely sure what you’re asking. I suspect you’re over-thinking it. Just bank like normal, and either release a little rudder pressure as you roll in (or increase it, depending on which way you’re turning).

    0 Votes Thumb up 0 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.