Welcome Guest. Sign in or Signup

2 Answers

when we feather propeller, why does manifold pressure gauge rise up?

Asked by: 2740 views Aircraft Systems

I fly BE-76, during run up, I set RPM2200 and brought propeller to full feather. I saw manifold pressure gauge rise up, why was it doing that?

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

2 Answers



  1. Warren Webb Jr on Jun 29, 2019

    When the engine is not running (zero rpm) the MP will be equal to the ambient air pressure (i.e. 29.92 Hg). As the rpm gets lower during the prop check (moves toward zero), the MP moves upward toward 29.92.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  2. KDS on Jun 29, 2019

    You ask an excellent question and we’ll assume a normally aspirated engine, which is what the BE-76 has.

    The manifold pressure is taken at a point between the throttle plate of the carburetor and the cylinders of the engine. It is measuring the vacuum between the two points. When the engine is not running, there isn’t anything sucking air into the intake manifold, so it reads ambient air pressure (on a standard day at sea level is should be 29.92 inches).

    When you do the prop check, you don’t move the throttle, so the throttle plate in the carburetor remains in the same place. However, the engine has a much tougher job turning the feathered prop, so it slows down. The only thing that was creating the vacuum was the engine running and sucking air into the intake manifold. When it is running slower and the throttle plate hasn’t moved, there isn’t as much vacuum.

    At this point I have to digress and tell a story from the past. I was with a young pilot who was showing me how he does a prop check. The first time he pulled the control back and moved it forward he said he was looking for an RPM drop. That did happen. Then on the next pull he said he was looking for a manifold pressure increase. That happened too. On the third pull he said he was looking for an oil pressure drop. That happened as well. I told him that was a good procedure, but in the future he might want to put his hand on the prop control instead of the mixture control.

    +2 Votes Thumb up 2 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.