Welcome Guest. Sign in or Signup

3 Answers

Cross country flight training

Asked by: 1812 views , ,
FAA Regulations

Hello,

Quick question concerning the 3 hours of cross country flight training.  Does the 3 hours of cross country flight training required have to meet the 50 mile minimum for distance to be considered cross country?  I know the solo cross country requirement, but not positive about the training.

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

3 Answers



  1. Mark Kolber on May 26, 2019

    Yes. See the FAR 61.1 definitions. All cross country requirements for FAA certificates and ratings (except ATP) require at least one landing more than 50 nm from the origin airport.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  2. Warren Webb Jr on May 26, 2019

    Agree with Mark. The key connection is where 61.1 says “for the purpose of meeting the aeronautical experience requirements”. Those are in 61.109 Aeronautical experience and include both the 3 hours of training and 5 hours of solo cross-country. For many years I used two airports which were 55nm from base – the time accumulated would always be 3.0 or just a little over (plan carefully to make sure you have no less than 3.0 or you will have to do another cross-country). I would be careful about selecting the destination airports and not use any airport which is 50.1 or even 50.9nm away. That will always create a debate of what is ‘more than 50nm’. I always made sure it was at least two or three over 50 measured either with a sectional and plotter or an automated system like skyvector.com to eliminate any doubt.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  3. jfalcon20 on May 27, 2019

    Thank you for the information, I appreciate the responses. I was wondering if anyone would answer what seems to be a very simple question, unfortunately those seem to be the ones most people don’t answer

    Enjoy the holiday,

    Jeff

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.