Welcome Guest. Sign in or Signup

3 Answers

Exiting Runway at Towered Airport

Asked by: 2915 views , ,
FAA Regulations, General Aviation, Private Pilot

When exiting the runway after landing at a towered airport is it a requirement or best practice to tell the tower or ground when you've cleared the runway? 

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

3 Answers



  1. Catfish on Feb 21, 2017

    No, it is not a requirement to report clearing the runway (to tower)…unless in very low visibility, that the tower directs you to “report when clear of Runway xx”.

    Additionally, making a call like this (to tower) would not be a best practice because it would be an unnecessary radio transmission on a possibly busy tower frequency.

    If not directed otherwise by tower, you should check in on ground frequency with your location (taxiway) and where you are parking / destination on the airfield.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  2. Jjinpine on Feb 22, 2017

    That’s a good question, I’ve wounded that myself. I have been told once the tower tells you what taxiway to exit. You switch to ground after passing the hold short markings of that taxiway. But I feel like I should say something to the tower first?

    -1 Votes Thumb up 0 Votes Thumb down 1 Votes



  3. Mark Kolber on Feb 25, 2017

    Jjinpine, you are asking a different question. No, you do not switch to Ground until Tower tells you to. See AIM 4-3-14, “A pilot who has just landed should not change from the tower frequency to the ground control frequency until directed to do so by the controller.”

    There are a number of reasons for this, but the most basic one is that the different stations at a control tower are just ways to divide labor. And there are multiple ways they can divide that labor? At airports with parallel runways, Tower often controls the taxiways between them. When things are very quiet, all tower functions, CD, Ground, Tower, might be on one frequency or you might be instructed to stay with Tower all the way to parking. I’ve even been to airports where Approach was also on the same frequency as CD, Ground, and Tower.

    Sound a bit confusing? It’s really not. It would be confusing if, every time we landed, we had to guess how they are dividing the labor any any given time at any given airport. But we don’t have to guess. We don’t change frequencies until they tell us to.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.