Welcome Guest. Sign in or Signup

1 Answers

IAS vs. CAS Stall Speeds

Asked by: 5390 views , , , ,
Aerodynamics

While reviewing the POH for a Cessna 172R, I noticed that the stall speed for the most rearward center of gravity with full full flaps is 33 KIAS and 47 KCAS.  Why is there a 14 knot difference between the two airspeeds?  Is it because not all of the airflow is flowing directly into the pitot tube during a higher angle of attack (stall)?  I would think that would result in a higher calibrated airspeed, but I have been receiving different answers from multiple pilots. 

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

1 Answers



  1. Skyfox on Sep 22, 2016

    The difference between IAS and CAS varies greatly from level cruise to slow stall speeds/configurations. CAS is a correction for installation and instrument errors, so there will be more errors (for most airplanes) when the attitude is nose high and slow and that is why the CAS is so much higher than the IAS in your example. Here’s a paragraph pasted from the Pilot’s Handbook of Aeronautical Knowledge:

    “Calibrated airspeed (CAS)—IAS corrected for installation error and instrument error. Although manufacturers attempt to keep airspeed errors to a minimum, it is not possible to eliminate all errors throughout the airspeed operating range. At certain airspeeds and with certain flap settings, the installation and instrument errors may total several knots. This error is generally greatest at low airspeeds. In the cruising and higher airspeed ranges, IAS and CAS are approximately the same. Refer to the airspeed calibration chart to correct for possible airspeed errors.”

    +2 Votes Thumb up 2 Votes Thumb down 0 Votes


Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.