Welcome Guest. Sign in or Signup

3 Answers

Constant-speed prop windmilling

Asked by: 4325 views Aerodynamics, Aircraft Systems, General Aviation


In the event of an engine failure, the best glide speed is stated as being 85 KIAS (flaps up and at 3,000 lbs.) What do you do with the windmilling propeller? High or Low RPM setting? I read someplace that if you go to the LOW RPM setting (increase pitch) that it reduces drag a little and will extend your glide a tiny bit. The HIGH RPM setting flattens out the prop blades and increases drag. What are your thoughts? Thanks.

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

3 Answers



  1. Jim F. on May 10, 2016

    I’m going to assume, seeing that you referenced ‘the prop’ on a 3,000 pound airplane, that you’re talking about a typical single-engine recip…

    So I’m gonna answer by asking a couple questions of my own:
    If you lost your engine (in order to cause a windmill), do you have oil pressure?
    If you don’t have any oil pressure, how can the prop be actuated out of high speed/low pitch?

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  2. Jeff Nunan on May 10, 2016

    Jim F.
    Thank you for responding to my question.
    In your opinion, would oil still be circulating as a result of the prop windmilling?

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  3. John D Collins on May 11, 2016

    As Jim points out, you may not be able to control the pitch of a constant speed prop if you have zero oil pressure, but on the other hand if you have zero oil pressure, it is often the case that the engine will freeze or the prop will rotate at a speed well below normal. The bad news is you lost the engine, the good news is that you will often glide much further, but it depends on the aircraft, engine, and prop.

    In my Bonanza, it is not a small effect, it is huge. If the engine failure does not involve loss of oil pressure, the prop position is dramatic. Anywhere much above the full rear stop, and the prop will turn at 1800+ RPM. At the full rear stop, it slows to 1100 RPM. The descent rate with the prop at the rear stop is around 800 to 1000 FPM. Anywhere much forward of the rear stop, the descent rate is at least 1400 FPM. Glide range is dramatically improved if the prop can be controlled.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.