Welcome Guest. Sign in or Signup

4 Answers

Logging cross country time for ATP

Asked by: 14274 views Commercial Pilot

for the private pilot license, cross country time is counted as a landing at an airport 50 nautical miles or greater..... I've been told the requirements are different for the ATP 500 hours of cross country.   Can someone shed some light on this?   Say I did sightseeing tours but took off and landed at the same airport.  Is this flight or part of it considered cross country??

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

4 Answers



  1. Gary Moore on Jan 13, 2016

    By definition, cross-country time includes any flight conducted by a pilot in an aircraft that includes a landing at a point other than the point of departure that includes the use of dead reckoning, pilotage, electronic navigation aids, radio aids, or other navigation systems to navigate to the landing point. Reference: 14 CFR 61.1(b)(3)(i).

    To meet the requirements for a private certificate (airplane), cross-country time requires a point of landing that is more than 50 nm straight-line distance from the original point of departure. 14 CFR 61.1(b)(3)(ii)

    That doesn\\\’t mean that a 25 mile cross country is NOT valid cross country time – it just not valid for the Private Cert cross country requirement.

    0 Votes Thumb up 3 Votes Thumb down 3 Votes



  2. Mark Kolber on Jan 13, 2016

    Yes, the requirements for what is considered to be a countable cross country are relaxed a bit for ATP. That’s primarily a tip of the hat to our military pilots who can fly long missions without ever landing other than at their “base” (which might be a carrier deck), but it applies to all of us.

    The definition for an cross country countable for this purpose is in the same place as the others: FAR 61.1(b). It’s the (vi) in the list of the cross country definitions and begins, “For the purpose of meeting the aeronautical experience requirements for an airline transport pilot certificate…”

    But the >50 NM requirement is still there.

    Small technical correction to the question: even for the private, it’s not “50 NM or greater.” It’s “more than than 50NM”

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  3. Dauntless Aviation - PilotLog.com on Jan 19, 2016

    Mark is technically absolutely correct in his distinction between “50nm or greater” and “more than 50nm” observation, but I think the distinction is absolutely meaningless unless you are able to differentiate an atom’s width diameter between, say, 50nm and 50.000000000000000000000001 nm.

    A bit of a plug: our PilotLog.com / Safelog pilot logbook system automatically computes cross country time for all the FAA certificates and ratings in a number of ways. So, for example, if you ask it to do a Private Pilot checkride analysis and you happen to be flying helicopters it will check your logbook against those requirements and if you’re doing an ATP in airplane it will check your logbook against the requirements there. In addition to providing a point-by-point ‘yes or no’ do you satisfy the requirement list for the aeronautical experience requirements for each FAA checkride, you can drill down deeper and it can prepare a detailed report which explains and evidences your experience; perfect for showing an examiner if you wish. In the case of XC time, it will automatically generate a list of qualifying flights and show you the distances involved. For more complex requirements like the long commercial XC it will even go further to show the ‘proof’ ‘long legs’ that are required.

    All of this will save you hours and hours of time while helping you look confident and ready for the examiner. No other eLogbook system comes even close to something like this and when you sign up for Safelog you help keep askacfi running as askacfi is sponsored by Dauntless Aviation, makers of Safelog.

    You can try Safelog for free at pilotlog.com or SafelogWeb.com. Works on all major platforms. To try the functionality I’m referring to, click on currency and then select the checkride of your choice.

    If you have questions or comments about Safelog, please contact us at our online helpdesk, not here. Thanks for supporting the site and for checking out Safelog!

    -5 Votes Thumb up 0 Votes Thumb down 5 Votes



  4. Tyler Connell on Jan 20, 2016

    Mark is correct. I have seen lot’s of CFI’s out there that get this confused. You don’t need to make any landings at any airports, as long as you fly a straight line distance of 50NM from your original point of departure, your flight is considered a cross country for an ATP per 61.1

    You also have to use dead reckoning, pilotage, electronic nav aids, radio aids, or other navigation systems along the route.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.