Welcome Guest. Sign in or Signup

1 Answers

G1000 BUS2 burn out

Asked by: 3286 views Aircraft Systems

The other night I was going for a night flight in a rental Cessna 172SP with a full G1000 system when I had a disturbing BUS2 failure. I had flown the same aircraft earlier in the morning with an instructor (IFR training) and had gotten a big red X on the HDG and AHRS. The instructor simply pulled the two AHRS circuits and reset them, commenting that they did that a lot recently on this plane. The rest of the morning flight was uneventful. Later that night when I was going to go for a night VFR flight I noticed a burning electric smell shortly after turning on the avionics after a normal start. There was some ramp construction going on 40ft away from me so I was not sure if the smell was from the plane or the workers. I decided to relocate to another area to do the run up and keep an eye on the smell and electrics. The smell disappeared and the run up was uneventful. I was cleared by ground to taxi to the active (long way from ramp). About halfway there the cockpit suddenly was filled with a very strong burnt electric smell. I elected to go back to the ramp to troubleshoot and abandon the night flight idea. There were no blown circuit breakers and nothing notable about the electrical display readings.  However when I went to turn off the avionics to begin shutting the plane down I found BUS2 to be fused in the on position. Plus when I touched it (still in on position) the MFD suddenly went black and the PFD began to flicker rapidly. BUS1 would toggle off but BUS2 was firmly stuck in the on position with the burnt smell still in the air, but not as strong. I promptly pulled the mixture and turned off the master. Does anyone know what would have caused that? Could the practice of the instructor of resetting the breaker to remove red X notifications have contributed? I am concerned that I had not gone back to the ramp it could have resulted in an in flight system failure, or worse an in flight electrical fire.

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

1 Answers



  1. John D Collins on Jan 10, 2016

    It sounds like your circuit breaker failed and fused together. The pull type circuit breakers are not intended to be used as switches. There are switches that are also circuit breakers and these are designed to be used on a regular basis, for example a landing light switch on some aircraft. I suspect that over use of the circuit breaker contributed to its early failure. When problems such as the AHRS or other failures are detected, they should be written up and repairs made. Repeatedly resetting a failing system to clear a fault is ignoring the fault and not dealing with the issue. Intermittent failures will eventually fail hard with unknown consequences.

    Although, it was not involved in your instance, thinking has evolved on when a popped circuit breaker should be reset, particularly in flight, because of the potential fire hazard. The purpose of the circuit breaker is to protect the wiring from overheating, burning, and shorting out other wires in the bundle. I suggest you read this article on the topic:

    http://www.planeandpilotmag.com/pilot-talk/ntsb-debriefer/should-you-reset-a-circuit-breaker.html#.VpJfs_k4GUk

    0 Votes Thumb up 0 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.