Welcome Guest. Sign in or Signup

4 Answers

CDA Continuous Descent approach (confused)!!

Asked by: 5835 views Commercial Pilot, FAA Regulations, Flight Instructor, Instrument Rating

hey dear Captains i have searched everywhere on the internet couldn't find any  useful answer .all they'r saying is what it is , and not how it works.!!! Its about CDA . i know many airliners use it because it has many benefits compared to Step-down FIX descend . so my question is simple ! . What's the formula?? how can we calculate when and with what rate to descend from initial approach fix (IAF) to FAF continuously , and after FAF, descend continuously to 50ft TCH Best regards.  

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

4 Answers



  1. Mark Kolber on Jan 06, 2016

    Read AC 120-108 Continuous Descent Final Approach. It discusses the technique – a stabilized descent from the FAF to the runway for non-precision approaches – as well as the calculation, which is essentially using the VDA published on the chart to calculate the rate of descent based on your GS.

    (I’m assuming some basic knowledge)

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  2. miladmaz on Jan 06, 2016

    dear mark thanks for the feedback . i studied what you mentioned. very useful
    just got one question : I’ve heard there is a new technique in performing Approaches which the pilot can start a continuous descent even before FAF , it could be from En-route flight or arrival-FIX or Initial-approach-Fix until FAF, see the following link

    https://www.eurocontrol.int/sites/default/files/publication/files/2011-cd-brochure-web.pdf

    it’s called CDA . i was wondering if you know about it. is it calculated like the CDFA or a totally different story?

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  3. Russ Roslewski on Jan 07, 2016

    The calculation is no different. It’s one of those examples of a simple concept that can often be really hard to execute.

    The considerations are: altitude to lose, distance to lose it in, desired glidepath angle and groundspeed.

    Appendix 1, Figure 3 in the AC mentioned above is still useful.

    Let’s say you want to descend from 10,000 feet to a runway at 1000 feet elevation, then you have to lose 9000 feet. Suppose you want to descend at a 3 degree glidepath.

    From the Figure 3, 3 degrees is 318 feet per nm.

    9000/318 = 28.3 nm, so you need to start your descent 28.3 flying miles from the runway (if you’re not straight-in, you have to include turns in here, which is tricky).

    What rate do you descend at? Depends on your groundspeed. Let’s say you’re maintaining 150 knots GS. From the same chart, that means you have to descend at 797 feet/minute.

    There are lots of “rules of thumb”. Notice, for example, that this descent takes about 3 nm for every 1000 feet you have to lose. so the quick calculation would be starting descent at 27 nm from the runway. Close enough.

    The tricky thing is that the wind and therefore the groundspeed, changes as you descend. So might your configuration – an airplane doing an enroute descent at 150 probably doesn’t fly final at 150. So there’s a LOT of “slop” in this determination, especially if you’re doing it in your head, or by hand.

    Advanced avionics will of course do these calculations for you.

    Hope this helps.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  4. miladmaz on Jan 09, 2016

    tnx russ , very helpful . just like the Top of descend formula which i have on my E6B – computer
    plus we must calculate the changes and arrival routes

    0 Votes Thumb up 0 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.