Welcome Guest. Sign in or Signup

1 Answers

Re-setting power on takeoff

Asked by: 2641 views Student Pilot

My new instructor has me resetting MP to 25 (from full) and RPM to 2500 (from 2700) on takeoff (typically around 200 AGL)... chatted with my first instructor and he suggested against messing with MP on takeoff..  any thoughts? Thanks, Jeff

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

1 Answers



  1. John D Collins on Jan 01, 2016

    Unless the engine has a limitation declared in the POH, I use full power until I have climbed to a safe altitude and then only reduce the RPM.

    The engine will run hotter if you pull the throttle back because at the full throttle position, it is set to run an over rich mixture. Have you ever noticed that a substantial pull of the throttle does not affect the performance in any material way and it takes some significant movement of the throttle before the MP begins to drop. This is because all you are really doing on the initial retarding of the throttle is leaning the mixture, which makes the engine run hotter in the climb. Eventually, the MP will begin to drop. So at sea level, assuming you are getting 28.5 inches of MP at full throttle, bringing it back to 25 inches will reduce your climb performance, make the engine run hotter, while giving you more pilot work to do. If your airplane is typical, it will probably average 700+ FPM in the climb, so by the time you climb to 3500 feet, the throttle will be back up at full power if you maintain 25 inches adjusting it up as you go to maintain the 25 inches.

    With most engines being rated for continuous usage at full throttle and full RPM, it makes very little sense to reduce and continuously adjust the MP just to climb at a reduced power for less than 5 minutes. In the old days, instructors taught to bring the throttle back and the RPM back at 200 feet. This is not the current thinking. Today, most instructors will teach to leave the throttle at the stop, and climb to altitude before adjusting the throttle. They also teach to reduce the RPM to reduce noise and be a good neighbor.

    I routinely climb my Bonanza at full throttle and full RPM to at least 1000 feet AGL and then reduce the RPM for a cruise climb. There is nothing wrong with climbing to altitude will full throttle and RPM, you will hurt nothing and get to altitude quicker.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.