Welcome Guest. Sign in or Signup

1 Answers

Crosswind correction in holding pattern without wind information

Asked by: 4234 views , , ,
Instrument Rating, Student Pilot

Hi,  I've heard many articles about crosswind correction in holding pattern. They mainly tell the outbound leg=correction times three things for slow speed aircraft. I notice all of them require wind information in holding pattern. What if somehow under some circumstances the pilot doesn't have the wind information in holding pattern? Is there any method to maintain precise 4 minutes holding pattern in such condition?

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

1 Answers



  1. Kris Kortokrax on Sep 30, 2015

    I’m confining this discussion to VOR because if you have GPS, this shouldn’t be a problem and NDB holds are becoming a thing of the past.

    You should have some idea concerning wind direction. You will be holding some wind correction to track to the station unless you have a direct headwind or tailwind.

    If you to a teardrop or parallel entry, you will be tracking a radial outbound and can make a pretty good determination about wind correction.

    The bigger issue is trying to get a 1 minute inbound leg (1 1/2 minute inbound leg > 14,000′). You won’t have a “precise 4 minute holding pattern” unless you are in a no wind environment.

    The easy way to adjust for the 1 minute inbound is to fly a 1 minute outbound leg, do the standard rate turn (1 minute) and then note the time inbound.

    It then becomes a simple proportion problem. With an E6B or CR-1, just set the inner 60 second mark underneath the inbound time (in seconds). Then underneath the 60 second mark on the outside ring, you can read the time (in seconds) to fly outbound that will yield a 60 second inbound leg.

    If you don’t do old school, then use the calculator app on your phone. Divide 60 by the number of seconds you noted on your first inbound leg. The multiply the result by 60. The answer will be the number of seconds to fly outbound to yield a 60 second inbound leg.

    Example: You fly outbound for 60 seconds, do a standard rate turn and end up with a 50 second inbound time.

    60 / 50 = 1.2
    60 * 1.2 = 72

    If you fly 72 seconds outbound and do a standard rate turn, you should end up with a 60 second inbound leg (the true objective).

    +3 Votes Thumb up 3 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.