Welcome Guest. Sign in or Signup

2 Answers

Take-Off from Helipads: What is the minimum rate of climb for an IFR take-off?

Asked by: 7936 views FAA Regulations

The AIM, 5-2-8, talks about Instrument DP, you must climb to 400' prior to turning unless the DP is different.  But what if I'm taking off from a helipad, I still climb to 400' then turn as required but what is my minimum rate of climb?  Is it a minimum of 400 FPM?  I need a reference.  Thanks.

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

2 Answers

  1. Best Answer


    Wesley Beard on Nov 22, 2010

    The TERPS requirement for both airplanes and helicopters are the same in this regard and is 200 feet per NM.  So if you are climbing straight up, there is no minimum climb rate.  If you are traveling forward at 60kts the minimum climb rate is 200’… at 90kts, 300 ft/min and so on.

    0 Votes Thumb up 2 Votes Thumb down 2 Votes



  2. rotorwng1 on Feb 14, 2016

    Departing a heliport requires a 400’\NM rate of climb up to 400′ prior to turning. The ratio for heliports, not helicopters, is doubled, requiring a doubled rate of ascent. You can verify this rate by comparing any helicopter approach to a “heliport” to the angle and rate of descent for the approach. It’s not the airframe that makes the difference here as much as it is the type of airfield you are departing. There are VERY few actual heliports in the world, therefore everyone thinks that the standard answer is 200’/NM. Departing from any airport, weather you are a helicopter or an airplane or taking off from a runway or a heliPAD at an airport, you must only maintain 200\’/NM. The reference is the terps, specifically for heliports. PLEASE DON”T use 200’/NM from a heliport unless you can depart visually, up to 400′ and then maintain the standard minimum rate of climb until you are on the route structure.

    +3 Votes Thumb up 3 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.