Welcome Guest. Sign in or Signup

2 Answers

Runway heading, missed approach

Asked by: 4796 views , , , ,
Instrument Rating

1. On takeoff, flying a SID, on non radar environment. When flying runway heading am I supposed to fly heading or correct for crosswind? 2. Missed approach, non radar environment. Am I supposed to fly runway heading or correct for crosswind.

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

2 Answers



  1. Kris Kortokrax on Jun 28, 2015

    Runway Heading is defined in the Pilot/Controller Glossary as follows:

    “The magnetic direction that corresponds with the runway centerline extended, not the painted runway number. When cleared to “fly or maintain runway heading,” pilots are expected to fly or maintain the heading that corresponds with the extended centerline of the departure runway. Drift correction shall not be applied; e.g., Runway 4, actual magnetic heading of the runway centerline 044, fly 044.”

    +4 Votes Thumb up 4 Votes Thumb down 0 Votes

  2. Best Answer


    Mark Kolber on Jun 28, 2015

    Daniel, think about it for a moment. Remember that these instructions existed before GPS. So, even without a formal definition as quoyd by Kris, when told to fly runay heading do you

    (a) read the dial (DG or HSI) in front of you and fly the numbers that correspond to the runway

    or

    (b) read the OAT, tune the Kollsman to 29.92 to get pressure altitude, whip out your E6B, convert IAS to TAS, ask to go off frequency for a minute, call Flight Service to get the winds aloft, turn the E6B over, do the wind triangle, figure out the wind correction angle, apply it to the number ATC gave you 5-10 minutes earlier and then make your turn

    The reason is that, from a traffic management standpoint, everyone is in the same wind s, unless everyone is capable of flying a track, it works better if everyone simply flies a heading.

    Personally, I treat ODPs and initial missed instructions as an exception if I think flying heading is going to bring me too close to terrain. I’m not too worried about following the Pilot/Controller glossary at that point.

    +2 Votes Thumb up 2 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.