Welcome Guest. Sign in or Signup

5 Answers

Holding distances shorter than published ATD/DME

Asked by: 3908 views ,
FAA Regulations, Instrument Rating

If the published holding distance is 5 miles, can you do 3 mile legs? Or is there any case when you can turn in earlier than the published distance?

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

5 Answers

  1. Best Answer


    John D Collins on Mar 21, 2015

    Unless ATC clears you fly a specific distance, the charted distance is a maximum and you may fly any leg length up to the maximum. This is covered in the AIM in a section on Holds in Lieu of a Procedure Turn, 5-4-9. The following is the current wording, it has evolved over the last many years:

    For a hold−in−lieu−of−PT, the holding pattern direction must be flown as depicted and the specified leg length/timing must not be exceeded.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  2. Drew on Mar 21, 2015

    So, it only applies to HILO-PTs. If it was a published hold on an airway that was not used as a HILO-PT, you must fly exactly that restriction.

    Thank you, John.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  3. John D Collins on Mar 21, 2015

    No, it is the same, but the guidance has never been put into the AIM other than in the HILPT where the question comes up more often.

    +2 Votes Thumb up 2 Votes Thumb down 0 Votes



  4. Mark Kolber on Mar 22, 2015

    There is a Chief Counsel opinion that treats hold distances as a maximum, unless ATC specifies a specific distance.http://www.faa.gov/about/office_org/headquarters_offices/agc/pol_adjudication/agc200/interpretations/data/interps/2011/young-hhc%20-%20(2011)%20legal%20interpretation.pdf

    There are 5 questions discussed. The holding distance is the last one.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes



  5. Mark Kolber on Mar 22, 2015

    Btw, personally, I have enough concerns that the distance may be used by ATC for separation purposes, that I prefer to advise ATC that I will be shortening it.

    +1 Votes Thumb up 1 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.