Welcome Guest. Sign in or Signup

2 Answers

Weight increase resulting in a stall speed increase

Asked by: 12449 views , , , , , ,
Aerodynamics

As weight of the airplane increases the stall speed does increase. Due to the greater weight, a higher angle of attack must be maintained to produce the additional lift to support additional weight in flight.Therefore the critical angle of attack will be reached at a higher airspeed when loaded to maximum gross weight than when flying solo with no baggage. Please could somebody explain the airspeed part in this explanation by the FAA?

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

2 Answers



  1. John D Collins on Jun 30, 2014

    If you remember your high school algebra, you can follow along with this explanation of how the stall speed is affected by weight.

    The basic lift formula is stated as L = 1/2 pV^2 x S x CL. The term p is the air density, V is the airspeed, S is the surface area of the wing and CL is the coefficient of lift. Since Lift equals Weight in un-accelerated flight, we can substitute W (Weight) for L (Lift), so W = 1/2 pV^2 x S x CL. We can use W1 for weight one, and W2 for weight two and then V1 will be the airspeed associated with W1 and V2 will be the airspeed associated with W2.

    The wing stalls at a constant angle of attack and at the point where CL is a maximum. This means that the CL at a stall is the same regardless of weight. So we can write the ratio of the weights equal to the following: W2/W1 = (1/2 pV2^2 x S x CL)/(1/2 pV1^2 x S x CL). Since the CL is the same anytime the angle of attack is the same, S is a constant, and p is the same, this can be simplified to the following: W2/W1 = (V2/V1)^2. Take the square root of both sides and then solve for V2 = SQ RT (W2/W1) x V1.

    This works for adjusting the stall speed as a function of weight and for any other speed that has a constant angle of attack. Best glide speed has a constant angle of attack, so it works for adjusting it as well.

    +12 Votes Thumb up 12 Votes Thumb down 0 Votes



  2. james henley on Feb 06, 2015

    I have always wanted to build a small wind tunnel at home to float on air even if it’s only a little. I can’t figure out how much cubic feet of air flow is needed to keep my 215 lb body in air. Can you break it down for me how to figure that out in lamens terms

    -3 Votes Thumb up 1 Votes Thumb down 4 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.