Welcome Guest. Sign in or Signup

2 Answers

Taxiway

Asked by: 3759 views
FAA Regulations, General Aviation

After landing at an airport with a control tower, we waited for about 15 seconds without hearing instructions on which taxiway to take.  We finally told the tower what part of the airport we wanted to go to and then the tower said to turn of at taxiway A.   Are there regulations regarding which taxiway to use after landing at an airport with a control tower?

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

2 Answers



  1. Brent on Oct 29, 2013

    The AIM has pretty clear guidance on this subject in paragraph 4−3−20 “Exiting the Runway After Landing.” I recommend you read the whole paragraph, but in summary, absent other instructions, you must exit the runway at the first available taxiway and taxi clear of the runway (all parts of the aircraft completely over the hold short line). Once clear, you must hold until further clearance is received.

    Unless explicitly cleared otherwise, you must never exit onto another runway, stop on the runway, or reverse on the runway.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes



  2. Sam Dawson on Oct 29, 2013

    As Brent mentioned a summary of the guidance is that you are expected to exit the runway as soon as feasible at the first available taxiway.

    It is also a good idea to have an idea where you are going on the airport ahead of time. Some runways/airports are easy- there is only one way to exit the runway and only one FBO. Others can be more complex. KLGB, for example, has several FBO’s at several locations around the airport as well as numerous crossing runways. (If you look at the right side of the attached link you can see an airport layout diagram that has the FBOs labeled).
    http://www.airnav.com/airport/KLGB

    At such airports as KLGB they will often ask inbound aircraft where they are going on the airfield. If not asked and if radio traffic permits I will tell tower where I am going and will try to plan my approach (if able) for one that puts me on a runway close to where I want to go. Again, looking at the example of KLGB you can see landing on 25R if going to Signature requires a more complex taxi after landing verses landing on 25L. You- and ATC in most cases- would prefer you land on 25L in this instance.

    0 Votes Thumb up 0 Votes Thumb down 0 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.