Welcome Guest. Sign in or Signup

2 Answers

GPS hold entry

Asked by: 11832 views Instrument Rating

I know that GPS holds are 4nm, but when entering the hold should you fly 4nm outbound when entering parallel or teardrop, and where can I reference this answer?

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

2 Answers



  1. John D. Collins on Mar 24, 2013

    RNAV (GPS) procedures use a distance hold rather than a timed hold. Many of them are the 4 NM variety, but other distances are also used. The distance or time is a maximum and a shorter distance may be flown at the discretion of the pilot unless you are specifically cleared to fly the full distance. At the distance limit, the turn back to intercept the inbound holding leg is required to commence if you have not already done so.

    See in the AIM both section 5-3-8 on holding and 5−4−9. Procedure Turn and Hold−in−lieu of Procedure Turn. In 5-4-9 (a) it states:in the introductory paragraph: “The maneuver must be completed within the distance specified in the profile view. For a hold−in−lieu−of−PT, the holding pattern direction must be flown as depicted and the specified leg length/timing must not be exceeded.” This wording has changed over the last few updates to the AIM to clarify that the distance is a maximum.

    -2 Votes Thumb up 0 Votes Thumb down 2 Votes



  2. Mark Kolber on Mar 25, 2013

    In addition to the AIM revisions, the question was also part (it answers a number of questions) the subject of a 2011 FAA Chief Counsel opinion letter:

    ==============================
    In. response to your fifth question, it is permissible, without specific ATC clearance, to shorten published outbound DME legs in a holding pattern as long as the issued holding pattern leg length is not exceeded. If A TC verbalizes leg lengths for either a charted or uncharted holding pattern, the pilot does have to obtain A TC clearance to shorten outbound legs to less than that which has been cleared. “When an ATC clearance has been obtained, no pilot in command may deviate from that clearance unless an amended clearance is obtained, an emergency exists, or the deviation is in response to a traffic alert and coIlision avoidance system resolution advisory.” See 14 C.F.R. 91. 123(a)
    ==============================
    http://tinyurl.com/445hxxl

    My own rule #1 is that you and ATC need to be on the same page. So, my practical take is that, if you are going to fly shorter legs once established in the hold, to at least inform ATC you are going to do so. There are holds with 7 NM legs; a bit far for a 172, so when I entered them (usually for practice) at my old home base, I generally informed ATC I would only be flying 4 NM legs. The hold being inside Bravo airspace, it seemed the heads-up was appreciated.

    0 Votes Thumb up 1 Votes Thumb down 1 Votes


The following terms have been auto-detected the question above and any answers or discussion provided. Click on a term to see its definition from the Dauntless Aviation JargonBuster Glossary.

Answer Question

Our sincere thanks to all who contribute constructively to this forum in answering flight training questions. If you are a flight instructor or represent a flight school / FBO offering flight instruction, you are welcome to include links to your site and related contact information as it pertains to offering local flight instruction in a specific geographic area. Additionally, direct links to FAA and related official government sources of information are welcome. However we thank you for your understanding that links to other sites or text that may be construed as explicit or implicit advertising of other business, sites, or goods/services are not permitted even if such links nominally are relevant to the question asked.